We use septic tank jetting to clear obstructions in connected drainage where the pipe condition permits water cleaning. First we locate the restriction. We then select the nozzle and pressure for that section and arrange recovery of the loosened material.
Septic Tank Jetting
Jetting for suitable septic drainage blockages, with the obstruction identified before pressure cleaning begins.
HomeSeptic Tank JettingSeptic Tank Jetting enquiry
Sludge recovery
The recovery route must prevent disturbed solids being driven towards the drainage field.
Locating the blockage
A cleared inlet pipe does not establish that the tank outlet and discharge field work properly.
Keeping solids out of the drainage field
Water jets can move sludge towards the tank outlet. Suction may be used to recover it before it reaches the drainage field, where solids can impair treatment in the ground. Internal baffles, cracked connections and fragile pipework affect how cleaning proceeds. They are checked before pressure is applied.
Septic drainage jetting
Complete the form and we will get back to you.
Inlet and outlet blockages
A blocked inlet holds sewage upstream, so toilets can back up even while the tank has room. Clearing the obstruction can restore use. A high tank with an open outlet points to a different problem, such as a drainage field struggling to accept flow. Jetting is directed at the blockage identified, rather than used throughout the system without diagnosis.
After the pipe is cleared
We check flow and note any remaining abnormal level. If the tool meets unexpected resistance, the pipe may require camera inspection before cleaning continues. Camera footage can also show cracks or displaced joints exposed by deposit removal. The findings help decide whether clearance has finished the job or a repair is required.
Septic Tank Jetting: common questions
Will jetting repair a drainage field?
A failed drainage field requires investigation of the ground and discharge arrangement. Jetting clears pipe obstructions.
Can pressure damage the installation?
Yes. Pressure and nozzle choice must account for the condition of the pipe and fittings.
When is suction used with jetting?
It recovers loosened material where allowing it downstream would carry solids towards the drainage field.
Why are toilets backing up if the tank has space?
A blocked inlet can hold sewage in the pipe before it reaches the tank.
How are cracks checked after clearance?
Camera inspection can examine pipe surfaces after cleaning exposes them.